New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Miami pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Hialeah, FL | Westlight Windows Miami
We service, repair, and replace Mr-Glass windows and doors across Hialeah as an independent provider. We’re not owned by Mr-Glass, and we don’t pretend to be. What we are is a crew that has pulled more corroded Mr-Glass frames out of concrete-block walls in this city than we can count, and we’ve learned exactly how Hialeah’s masonry, humidity, and hurricane prep habits change how that work has to be done. If you’ve got a jalousie with bent clips or a horizontal roller that seizes every time it rains, call us at (850) 753-2730 and tell us what you’re seeing. You can also always browse our Mr-Glass sales & service page for more detail on the brand.
Why Hialeah Residents Choose Us for Mr-Glass Service
Most window companies in South Florida know glass. Fewer know Hialeah’s block construction the way we do. Owen Satterfield, our owner here at Westlight Windows Miami, learned the trade at Los Angeles Trade-Technical College and spent nearly twenty years installing windows and doors across Southern California before bringing that experience to Miami. Here’s the thing about Hialeah though: a 1958 ranch with Mr-Glass jalousies set straight into the block is a different animal from anything you’d see in Coral Gables. We’ve spent years here learning what those walls do to window frames, and it means we diagnose Mr-Glass problems faster and fix them more completely than a crew that mostly works wood-frame houses.
We carry OEM Mr-Glass hardware wherever it’s still available: clips, balances, rollers. When a part has been discontinued for thirty years, we source marine-grade aftermarket components that actually stand up to Hialeah’s corrosion. Either way, you get a straight answer about what’s worth fixing and what’s better off replaced. And because we’re an independently owned and operated Kingswell location, every price goes in writing before any work starts. Tell me what you’re dealing with, and I’ll tell you straight what it’ll take to fix it.
Common Mr-Glass Windows & Doors Problems We Solve in Hialeah
- Corroded frames on Mr-Glass 3400 Horizontal Rollers. Hialeah humidity wicks through unsealed block openings year after year, and the aluminum on these early rollers pays for it. We see pitting along the bottom track and at the corners where moisture pools. If the frame still has structural integrity, we clean, treat, and replace the worn rolling hardware. If it’s bowed or crumbling, we tell you straight that a full-frame retrofit is the smarter spend.
- Bent or missing jalousie clips on Mr-Glass 2000 louvers. Storm taping does a number on these clips. Every hurricane season, we find panes with missing clips or bent arms from tape that was yanked off too hard. Loose panes rattle in the wind and fail to seal. We replace the clip system and re-bed the panes so they actually close tight.
- Fogged glass in Mr-Glass 600 Series Single Hungs. South Florida UV and constant thermal cycling kills the desiccant inside older insulated units. Once the seal fails, you get fog between the panes that never fully clears. We can replace the glass pack, but we’re honest with Hialeah homeowners: if the frame shows corrosion or the original install wasn’t flashed to the block correctly, you’re often better off going with a new impact-rated unit.
- Stiff or seized rollers on Mr-Glass 5700 Impact Sliding Glass Doors. Salt-laden air and concrete dust from surrounding construction and traffic grind into door tracks. The rollers wear flat, the door drags, and eventually it won’t move at all. We replace the roller assemblies and adjust the track so the door glides the way it did when it was new.
- Wind-driven rain intrusion around Mr-Glass awning windows from the 1970s. These were never designed for the wind pressure Hialeah gets. After a few decades, the gaskets harden and the frame-to-block seals fail. Rain gets driven up under the sill line and into the wall. We replace the gaskets, re-seal the perimeter, and when the opening calls for it, retrofit an impact-rated unit that actually passes Miami-Dade requirements.
Can You Replace My Mr-Glass Jalousie Windows with Impact Glass Without Rebuilding the Opening?
Hialeah’s pre-1970 concrete-block homes often have Mr-Glass jalousie or awning windows set directly into the block with no wood bucks. That means proper Window Replacement in Hialeah isn’t just a window swap. It means grinding out the old stucco returns, installing new aluminum or vinyl bucks, and flashing to the face of the block. This is the detail you won’t see crews dealing with in neighboring Coral Gables or Miami Springs, where wood framing dominates. On East 4th Avenue, we pulled a corroded Mr-Glass 3400 horizontal roller from a 1958 ranch and found the original installers had set the frame directly into wet stucco with no backer rod. Our crew chipped out the rotten mortar, bedded a new impact-rated unit in a flanged buck with full perimeter flashing, and re-stuccoed the interior return before that family’s next pre-hurricane tape-up. That’s the practical difference between someone who says they can do Hialeah work and someone who actually has. Most Hialeah Mr-Glass replacements aren’t glass problems; they’re masonry flashing problems, and how you handle them determines whether the new window leaks in three years or thirty.
Mr-Glass Models & Products We Service in Hialeah
We work on Mr-Glass 600 Series Single Hungs, 3400 Horizontal Rollers, 5700 Impact Sliding Glass Doors, and the 2000 Jalousie. Parts coverage changes from model to model. Clips for the 2000 jalousie and balance systems for the 600 series are still available as OEM where the line isn’t fully discontinued, and we keep common Mr-Glass hardware stocked for faster Hialeah turnaround. When OEM parts are gone, we don’t substitute cheap generics. For discontinued jalousie and early aluminum lines, we source marine-grade aftermarket parts because they resist the kind of corrosion Hialeah dishes out. For window replacements, we offer impact windows, insert replacement, and full-frame replacement, always matched to what the actual opening and wall construction require.
Mr-Glass Service Pricing in Hialeah
Most Mr-Glass service calls in Hialeah run between $95 and $250 for diagnosis and minor hardware repair. Replacing a jalousie clip set usually lands in the $180 to $340 range depending on how many panes are involved. A fogged glass pack replacement on a Mr-Glass 600 Single Hung typically runs $350 to $700 per sash. Full-frame impact retrofits into block walls are bigger money: depending on opening size and condition, expect to budget from $1,900 to $4,500 installed. We don’t do vague estimates. You get a written, line-item price before any work begins, and that price doesn’t change at the door. Call (850) 753-2730 for an exact quote, the estimate is free.
Serving Hialeah, FL - Our Local Coverage Area
We’re based in the Hialeah area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Hialeah
Yes, in most cases we can retrofit impact-rated windows into the existing opening using a flanged buck system and full perimeter flashing. The opening itself typically doesn’t need to be rebuilt, but the stucco returns around it do get cut back and re-finished. The process takes more labor than a Window Installation in Hialeah for wood framing, which is why it costs more here than it might in other parts of Miami. Call (850) 753-2730 and we’ll take a look at your specific openings and give you a written price.
Humidity and rain seep into unsealed block openings, and concrete dust from Hialeah’s roads and construction gets into the tracks. Together they abrade the rollers and create a gritty paste that seizes the mechanism. We clean the track, replace the roller assemblies, and address the moisture entry so it doesn’t return every storm season.
Yes, we can replace the glass pack on a Mr-Glass 600 Series Single Hung, and for a frame in good condition that’s often the right call. But if the frame shows corrosion or the original install wasn’t flashed correctly to the block, replacing just the glass is a band-aid. In Hialeah, where humidity gets into every unsealed seam, we usually recommend an impact-rated replacement that solves the fog, the leak, and the storm concern at once. Call (850) 753-2730 and we’ll tell you which direction makes sense for your windows.
Mr-Glass impact units that meet Miami-Dade testing standards are designed to withstand wind-borne debris without additional shutters. That’s what the rating is for. But the installation matters as much as the glass. If the frame isn’t properly anchored and flashed into Hialeah’s block walls, even a rated window can fail at the perimeter. We pull permits, install to current code, and stand behind the work with a written guarantee.
We carry some hardware for older Mr-Glass awnings where it still exists, and we source compatible aftermarket parts for discontinued hardware. If the frame is straight and the opening is tight, repair is often possible. If the frame is corroded or the opening has settled, full replacement is usually the more honest recommendation. We’ll show you the condition we’re seeing and let you decide with real numbers. Call (850) 753-2730 to schedule a look.
Service Areas Near Hialeah
We serve Hialeah and the surrounding cities. Our crews regularly work in Miami, Doral, Kendall, North Miami Beach, and Aventura, so the Hialeah knowledge we bring to your project travels with us. If you’re nearby, see our pages for Mr-Glass service in Doral and Mr-Glass service in Miami. You can also read about our full Hialeah service area coverage.
Book Your Mr-Glass Service in Hialeah Today
Call (850) 753-2730 to schedule a free estimate for Mr-Glass repair or replacement in Hialeah. We’ll get a real person on the phone, set a window for the visit, and put your price in writing before any work starts.
Written by Owen Satterfield, Owner at Westlight Windows Miami, serving Hialeah since 2009.
Six Reasons Homeowners Choose Westlight Windows Miami
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.